[Article Information]

Crushing Energy Dissipation Characteristics of Graphite Ore Rock under Impact Loads



YE Hai-wang,YAN Li-de ,LEI Tao ,WANG Qi-zhou1a,1b ,YU Meng-hao , LI Xing-wang,WEN Ying,GAO Yu-wen ,ZHOU Jian-min ,DAHE M G




Abstract


Abstract: In order to study the crushing energy dissipation characteristics of graphite ore rock under impact loads, φ 50 mm diameter split Hopkinson pressure bar( SHPB) test device is used to conduct impact compression tests. The crushing energy dissipation law of the graphite ore rock samples is analyzed under different loading rates with five different impact pressures from 0. 2 MPa to 0. 6 MPa with a 0. 1 MPa interval. The test results show that the dynamic compressive strength of the samples have a strong third-order polynomial relationship with the average strain rate under impact loads. The graphite ore rock has dynamic hardening under impact loads,and its dynamic compressive strength in- creases nonlinearly with the increase of strain rate,which shows an obvious strain rate effect. In addition,there is an obvious logarithmic relationship between the crushing dissipation energy and the incident energy. With the increase of incident energy,the crushing dissipation energy also increases. However,the proportion of the crushing energy gradually decreases from 0. 38 to 0. 11. The crushing energy dissipation density of the samples has an obvious strain rate effect, and its value increases with the increase of strain rate. Besides,the average particle size of the broken samples is strongly correlated with the energy dissipation density of the samples. As the energy dissipation density increases,the crushing degree of the sample becomes more severe. Therefore,the average particle size of the crushing fragments can be used to quantitatively describe the crushing degree of the samples.



Key words: impact load; crushing fragment; crushing energy dissipation; split Hopkinson pressure bar( SHPB)





Chinese Information


标题: 冲击荷载下石墨矿石破碎能耗特征



作者: 叶海旺 ,严立德 ,雷 涛 ,王其洲 ,余梦豪 , 李兴旺 ,温 颖,高玉文,周建敏 ,DAHE M G



摘要: 为了研究晶质石墨矿石试样在冲击荷载作用下的破碎能耗特征,采用 φ 50 mm 的分离式霍普金森压 杆( SHPB) 试验装置,设置气压间隔为 0. 1 MPa,0. 2 ~ 0. 6 MPa 共 5 组冲击气压,进行不同加载速率条件下石墨 矿石试样冲击压缩试验,并分析石墨矿石试样破碎能耗规律。试验结果表明: 在冲击荷载作用下,石墨矿石试 样的动态抗压强度与平均应变率具有较强的三阶多项式关系,且石墨矿石在冲击荷载作用下具有动态硬化作 用,其动态抗压强度随着应变率的增大呈非线性增大,呈现明显的应变率效应; 石墨矿石试样破碎耗能与入射 能具有显著的对数关系,随着入射能增大,试样破碎耗能也随之增大,但其试样破碎耗能所占比例随应变率增 大逐渐由 0. 38 下降至 0. 11; 随着平均应变率增大,石墨矿石试样破碎耗能密度呈非线性增长,具有较强的应变 率效应; 石墨矿石试样的破碎平均粒径与破碎耗能密度具有显著的三阶多项式相关关系,随着石墨矿石试样耗 能密度增加,石墨矿石试样破碎程度加剧,可以采用石墨矿石试样破碎块度平均粒径实现对石墨矿石试样破碎 程度进行定量描述。



关键词: 冲击荷载; 破碎块度; 破碎耗能; 分离式霍普金森压杆( SHPB)



Journal Integrated Operation and Management Platform with Network JMPN-2.0
Journal Integrated Operation and Management Platform with Network

《Blasting 》editorial department
Copyright © 2009   System Management   Chinese
Statistical information:total visitors Online0
putting on ICP record: E-ICP Prepared No. 05003336-9